{"id":114933,"date":"2026-03-19T14:21:05","date_gmt":"2026-03-19T14:21:05","guid":{"rendered":"https:\/\/www.jtape.com\/how-to-use-double-sided-mounting-tape-for-number-plate-mounting\/"},"modified":"2026-04-21T09:18:33","modified_gmt":"2026-04-21T09:18:33","slug":"how-to-use-double-sided-mounting-tape-for-number-plate-mounting","status":"publish","type":"post","link":"https:\/\/www.jtape.com\/en-us\/news\/how-to-use-double-sided-mounting-tape-for-license-plate-mounting\/","title":{"rendered":"How to Use Double Sided Mounting Tape for License Plate Mounting"},"content":{"rendered":"

By following JTAPE\u2019s expert guidance, auto body technicians can complete installations more efficiently while ensuring strong, long\u2011term adhesion and a clean aesthetic result.<\/p>\n

Choosing How to Mount Your License Plate<\/h2>\n

Traditionally, license plates are fixed using screws or mechanical fasteners.<\/p>\n

Although this method is widely used, it can require drilling into bumpers, potentially introducing corrosion points and creating visible hardware that disrupts the vehicle\u2019s finish.<\/p>\n

Alternatively, using high\u2011strength mounting solutions such as Double Sided Mounting Tape<\/a> and High Strength Acrylic Tape<\/a> allows for a flush, professional appearance without damaging painted surfaces.<\/p>\n

\"high<\/picture><\/p>\n

These solutions help distribute stress evenly across the plate, reduce vibration transfer and provide reliable weather resistance for long\u2011term performance.<\/p>\n

How to Remove a License Plate<\/h2>\n

Removing a Screwed on Plate<\/h3>\n

Unscrewing a license plate from the front or rear of a vehicle is typically straightforward when using the correct tools.<\/p>\n

Start by opening any plastic screw caps to expose the fixings, then identify the appropriate screwdriver or drill attachment required to loosen the screws. Flathead and Phillips screw heads are the most commonly used.<\/p>\n

Support the plate while removing the final screw to prevent it from dropping or scratching the surrounding finish, and once the plate has been removed, inspect the mounting area and remove any dirt, corrosion or debris before installing a new plate.<\/p>\n

Removing a Tape-mounted Plate<\/h3>\n

If the plate has been secured using double sided mounting tape or pads, additional care may be required to remove the plate<\/a> due to the strength of the adhesive bond.<\/p>\n

Begin by gently lifting one corner of the plate using a plastic trim removal tool, and gradually work along the plate edge to separate the adhesive. Dental floss, plastic scrapers or approved adhesive removers can be incredibly useful at this stage. Applying low, controlled heat may also soften the adhesive and reduce the risk of damaging painted surfaces.<\/p>\n

Once removed, thoroughly clean the bonding area to prepare it for the new installation.<\/p>\n

How to Mount a License Plate<\/h2>\n

Ready to mount a license plate using JTAPE\u2019s professional product range? Follow our expert steps below to achieve optimal results.<\/p>\n

1. Clean the Area<\/h3>\n

Starting with a clean base will help prevent damage to the finish while ensuring the adhesive has a suitable surface to bond to. Use a clean cloth or sponge with exterior shampoo and warm water to remove contaminants. Next, dry the surface thoroughly using a second clean cloth. For best results, ensure the surface is completely free from grease, wax, moisture and polishing residue before proceeding.<\/p>\n

2. Apply the Mounting Tape to the License Plate<\/h3>\n

Using your chosen JTAPE mounting solution, remove the backing liner on one side and apply the adhesive evenly to the rear of the license plate.<\/p>\n

There are various options you could choose from in the JTAPE range, which offer slightly different benefits, while being more than adequate for the job of mounting a license plate.<\/p>\n

Double sided mounting tape works perfectly because it can be applied in strips to distribute load consistently across the plate. High Strength Acrylic Tape will also provide this long-term adhesion, with particular resistance against solvents, chemicals, UV, and heat.<\/p>\n

For the best adhesion, avoid touching exposed adhesive surfaces, as this may negatively affect the bonding agent.<\/p>\n

It\u2019s also worth noting that while JTAPE products are designed for long-term performance, it\u2019s important to use sufficient coverage across the tape to minimize stress points and movement once installed.<\/p>\n

3. Position the License Plate<\/h3>\n

To get the license plate in the right position, ensure that time is taken to carefully align the license plate before making full contact with the car\u2019s body. If the position is slightly off, minor adjustments can be made as long as the adhesive hasn\u2019t made full contact with the body of the car.<\/p>\n

4. Apply Pressure to the Plate<\/h3>\n

Once correctly aligned, apply firm and even pressure across the entire surface of the plate for at least ten seconds. For larger plates, working from the center outward can help to remove trapped air and improve surface contact for better adhesion.<\/p>\n

What to Avoid when Mounting a License Plate<\/h2>\n

Your license plate will have to face all the elements, so it\u2019s important to ensure that your application and the tape itself are fit for purpose. Here are a few considerations you should make.<\/p>\n